How do I set up a recording with dia-BRUXO System?
Connect your dia-BRUXO device to your PC.
Start dia-BRUXO App and click on the “Connect” Action Button after selecting the USB Port from the drop-down menu.
Click on the “Program Recording” Action Button and select the recording duration and Standby Delay.
Can I set up a recording start time to then action it later?
The recording starts, after a standby delay (configurable from 3 to 10 minutes), as soon as dia-BRUXO device is disconnected from the USB Port or the wall charger.
The start recording time is thus not configurable.
Can I stop a recording before its intended duration has elapsed?
The recording stops automatically once the programmed recording duration has elapsed. It can be stopped earlier by simply connecting dia-BRUXO device to either a PC or a wall charger.
If during the recording dia-BRUXO device comes off, is it possible to apply it again without compromising the recorded data?
Once dia-BRUXO device loses contact with the skin the recording cannot continue.
How do I download the PDF Report provided by dia-BRUXO System?
Connect your dia-BRUXO device to your PC.
Start dia-BRUXO App e and click on the “Connect” Action Button after selecting the USB port from the drop-down menu.
Click on the “Generate Report” Action Button and configure the report according to the details of the recording you just made.
Does dia-BRUXO System detect Sleep automatically?
You can separate the Sleep/Awake Circadian Phases by inserting the Sleep start/end times on dia-BRUXO App through the “Generate Report” Action Button at Section 4 “Report Preferences”.
I cannot enter the Sleep start/end times.
You can enter the Sleep start/end times through dia-BRUXO App with the “Generate Report” Action Button at Section 4 “Report Preferences”.
You can insert up to two Sleep Phases (main nighttime sleep and an additional daily nap) and the sleep times need to be within the Recording Start and End times.
Is it possible to edit a PDF Report once created?
Yes, you can do that through dia-BRUXO App by clicking on the “Edit Report” Action Button. You will be prompted to select the file you want to edit and will be able to create a new version of the previous report, which remains in the original folder and is not deleted.
What do the LED lights of dia-BRUXO mean?
Blinking Red: dia-BRUXO device is not ready for a new recording (either there is a previous recording still saved in the device’s memory or a new recording has not been programmed).
Blinking Green: dia-BRUXO device is charging.
Steady Green: dia-BRUXO device is fully charged.
Steady Blue: dia-BRUXO device is in standby delay mode. The recording will start after the set delay has elapsed (from 3 to 10 minutes)
Blinking White: dia-BRUXO device will blink every 10 seconds to let you know that the recording is in progress.
Blinking Blue: dia-BRUXO device has finished recording. The light will be visible until the battery has fully discharged. Don’t worry, dia-BRUXO has saved your data and is ready to be connected to dia-BRUXO App to let you download the PDF Report.
